Vibration damping for machines and equipment – reduces vibrations
Reduce structure-borne noise and vibrations from technical equipment in houses and homes
In houses and homes, it is common for machines and technical equipment to cause disturbing vibrations. When a machine vibrates during operation, the movement can spread through floors, walls, pipes, and joists. This often leads to structure-borne noise, low-frequency humming, or shaking that can be felt in other rooms or on other floors. Vibration damping of machines and equipment involves breaking this mechanical transmission before the vibrations spread throughout the building.
What does vibration damping of machines involve?
Vibration damping means reducing how mechanical movements are transmitted from a machine to the building's structure. Unlike sound insulation, which stops airborne sound between rooms, and sound absorption, which reduces echo and reverberation in the room, vibration damping focuses on the movement itself in the structure. By reducing the vibrations at the source, the sound problems caused by resonance and structure-borne noise are also reduced.
Common sources of vibration in houses and homes
In homes, vibrations often come from heating and ventilation systems, such as air source heat pumps, ground source heat pumps, exhaust fans, and ventilation units. Vibrations from fans can also spread through ventilation ducts and cause disturbances in other parts of the house, especially in the evenings and at night.
Household appliances such as washing machines, dryers, dishwashers, and drying cabinets are also common sources of vibration. During the spin cycle, for example, the machine can vibrate violently, move and transfer the movement to the floor and walls. The same applies to circulation pumps, water pumps, sewage pumps and pool equipment, which often emit a constant hum that spreads far from the source itself.
Other examples include compressors in garages or hobby rooms, dehumidifiers, fans, and server and network equipment in the home. What these have in common is that the vibrations are often continuous, low-frequency, and difficult to remedy without targeted vibration-damping measures.
How do vibrations spread in a building?
When a machine vibrates, the movement is mechanically transferred to the ground and further through the building's frame. Floors, walls, pipes, and joists act as conducting structures where vibrations can be amplified through resonance. This means that the problems are often experienced in rooms where the machine is not located, which can make both troubleshooting and remedial action difficult.
Principles for effective vibration damping
Effective vibration damping is based on reducing direct contact between the machine and the building frame. Through decoupling, the use of elastic materials, and reduced mechanical transmission, vibrations can be slowed down before they spread further. The goal is to isolate the movement at the source rather than trying to deal with the consequences afterwards.
Well-considered advice for best results
For best results, it is important to identify which machine is causing the vibrations and how the movement is spreading throughout the building. A common mistake is to focus on the room where the disturbance is noticeable, even though the source is often located elsewhere. By working with vibration damping directly at the machine, both structure-borne noise, humming, and shaking can be reduced more effectively and in the long term.
Vibration damping of machines and equipment is therefore a crucial measure for reducing disturbing vibrations and creating a quieter and more stable living environment in houses and homes.